A mechanism based on finger-sliding behavior for designing radial menus

Human behavior about sliding their fingers on touch screens needs to be understood for the design of radial menus. For this purpose, data about the angles of finger sliding in performing radial pointing to eight predefined directions were collected. The optimal angle ranges and boundaries for these directions were then determined by the proposed mechanism. Consistent with previous research, results showed that the deviations of slide angles for the four diagonal directions were larger than that for the four orthogonal directions. Therefore, to reduce overall pointing errors, the angle ranges for the diagonal directions should be wider than that for the orthogonal directions. Based on the proposed mechanism, the total probability of pointing errors could be limited to 0.05%, compared to the error of 2.00% if the eight angle ranges were evenly divided by the radii of a regular octagon. Besides the angles, the lengths and starting points of the slides were reported and discussed along with the oblique effect, judder effect, and screen orientation. Possible applications of the proposed mechanism for dynamic and personalized radial menus are addressed. Further research would be worthwhile to examine the effects of screen orientation and the number of predefined directions on pointing performances. Moreover, extending the research to mid-air sliding gestures would be of interest and value in designing three-dimensional radial menus.Relevance to industryThe proposed mechanism could effectively enhance the accuracy of the selections through radial menus, and could be applied to the remote controls via smart handheld devices.     

Does placebo effect exist in contact lens discomfort management?

PurposeTo study the effect of daily disposable contact lens (DDCL) refitting in monthly contact lens (CL) wearers suffering from contact lens discomfort (CLD), and to assess if there is a placebo effect associated with this CLD intervention.MethodsSymptomatic CL wearers, according to the Contact Lens Dry Eye Questionnaire 8 (CLDEQ-8 ≥ 12 points), were divided into two groups. The study group was provided with DDCLs (delefilcon A) and the control group with a masked pair of their habitual monthly CLs (placebo effect) and were assessed after one month. Then, the control group was provided with the same DDCLs and evaluated one month later. The symptoms were recorded with the CLDEQ-8 and global rating of change scale (GRCS). Non-invasive tear break-up time (NITBUT), conjunctival hyperaemia, fluorescein staining, and lid wiper epitheliopathy (LWE) were evaluated. Changes between visits, groups, and the effect of each intervention were analysed.ResultsThirty-one participants (mean age: 23.2 ± 5.3 years) were recruited. The study group (n = 14) showed an improvement of -39.6 ± 25.8 % (p < 0.001) in CLDEQ-8 and 31.3 ± 14.6 points in GRCS (p < 0.001) after one month of DDCL use, while no changes in clinical tests were found. In the control group (n = 17), symptoms improved significantly after wearing the masked monthly CL (CLDEQ-8: -26.1 ± 31.0 %, p = 0.03; GRCS: 14.9 ± 17.0, p = 0.002), however a worsening in bulbar (26.5 ± 40.0 %; p = 0.02) and limbal hyperaemia (21.6 ± 34.7 %, p = 0.02) and an improvement of -19.1 ± 37.0 % (p = 0.049) in LWE was found. When the control group was fitted with the DDCL, improvements in GRCS (20.5 ± 25.5, p = 0.02), NITBUT (37.9 ± 42.3 %, p = 0.002), and conjunctival staining (-47.1 ± 59.9 %, p = 0.005) were noted.ConclusionsRefitting symptomatic monthly CL wearers with Delefilcon A DDCL is effective in reducing symptoms related to CLD. However, clinicians and researchers must be aware of the existence of a placebo effect when assessing the effectiveness of any CL refitting.     

DCNN深度特征与交替方向乘子的相关滤波跟踪

针对采用相关滤波的判别式目标跟踪遇到的瓶颈问题：由于目标快速移动引起边界效应，使得相关滤波器在学习与更新过程中可能会引入错误，最终错误的累积将导致跟踪失败。在采集深度学习特征与样本相似性度量的基础上，提出一种引入交替方向乘子方法的改进相关滤波目标跟踪算法，选择DCNN深度特征有效地表征待跟踪目标的初始状态，通过在线分类过程中样本相似性比对与半监督学习，辅助解决相关滤波器在学习过程中存在的自学习问题。所提目标跟踪算法特别适合训练样本为持续获得的、同时存储空间较小的机器学习过程，提高目标在快速运动与部分遮挡等复杂情况下的跟踪成功率，针对VOT2016标准测试视频的实验表明：当目标面临快速运动时，对比CN、SAMF、STC算法，所提DA-CFT跟踪算法将跟踪成功率分别由60.4%～73.4%、67.2%～82.9%、80.9%～88.1%提升至85.6%～91.0%。     

Inductive effect in Mn-doped ZnO nanoribon arrays grown on Ni foam: A promising key for boosted capacitive and high specific energy supercapacitors

Transition metal oxides have been explored in supercapacitor applications owing to their safety, low cost, high specific capacitance and high electrochemical activity. Among all transition metal oxides, zinc oxide based materials show remarkable response for designing the supercapacitors with high electrochemical activity. Here in, Mn doped ZnO (Zn_1-xMn_xO₃ with x = 0, 0.25, 0.50, 0.75 and 1) was synthesized by a facile hydrothermal method. Doping of Mn into the ZnO increased the surface area and decease the charge transfer resistance for the Zn_0.5Mn_0.5O₃. All the synthesized materials were characterized by x-ray diffraction (XRD), scanning electron microscopy SEM), BET, electrochemical tests and other various analytical techniques to confirm the structural, morphological, textural and suprcapacitive properties. The synthesized material Zn_0.5Mn_0.5O₃ having the porous nanoribons structure with BET surface area (2490 cm²/g). The electrochemical studies showed significantly enhanced response toward pseudocapacitive nature. The synthesized material exhibited the excellent specific capacitance (515F/g), specific energy (28.61 Wh/kg) and specific power (1000 W/kg) at current density of 2 mA/g. Such impressive and superior properties make the MnZnO₃ material as promising candidate for new generation supercapacitor applications.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

Mesoporous electroactive silver doped calcium borosilicates: Structural,antibacterial and myogenic potential relationship of improved bio-ceramics

In this work improved electroactive mesoporous Ag-doped bio-ceramics for medical usages are developed, examining their structural, electrical, in-vitro bioactivity, cell cultures and antibacterial properties against various classical pathogenic bacteria. Ag-containing mesoporous bio-ceramics (MBCs): xmol%Ag₂O - (100-x)[45.8CaO-8.4B₂O₃-45.8SiO₂] where x = 2, 5, 7.5 and 10 were synthesized through a sol-gel method. The small angle X-ray scattering and electron microscopy studies reveal the embedment of silver nanoparticles in the samples. Existence of silver as Ag⁺/Ag⁰ forms in the samples is confirmed by X-ray photoelectron spectroscopy. The N₂ adsorption-desorption analysis evidence the mesoporous structure of the samples. The electrical conductivity of samples increases from 5.4 x 10^?8 S cm^?1 for x = 2 to 1.9 x 10^?6 S cm^?1 for x = 7.5 and then decreases to 0.9 x 10^?6 S cm^?1 for x = 10 at 110 °C. In vitro bioactivity studies revealed that Ag-containing MBCs hold the bone-like hydroxyapatite formation after immersion in human blood plasma like-solution such as Dulbecco's Modi?ed Eagle's Medium. The antibacterial effect of samples against pathogenic bacteria (S. aureus, E. coli, P. monas aeruginosa, and B. cereus) increases with Ag concentration (x = 7.5) and then decreases with Ag content (x = 10). Antibacterial effect is greater for the sample with high electrical conductivity. The cell culture studies evidence not considerable cytotoxic effects for Ag-containing MBCs. Finally, the C2C12 myoblast cell culture studies reveal the significant cell growths and differentiation (myogenesis) for high electrical conducting Ag-containing MBCs.     

New insight into subcritical rupture of SiC-based filaments at intermediate temperatures (400–900 °C) under air

The delayed failure of SiC fibrous reinforcement has continuously been investigated to warrant the long term performances of Ceramic Matrix Composite (CMC). Chiefly assessed on multifilament tow samples to alleviate some handling difficulties, subcritical crack growth (SCG) parameters are however ruled by structural artifacts which hinder the identification of intrinsic filament behavior. In this paper, we propose to estimate the true filament parameters for 5 fiber types from bundle behavior using a recently communicated Monte Carlo algorithm integrating flaw and stress distributions through a deterministic fracture mechanics law under Paris’ formulation. So computed tow lifetime are broadly dispersed, encompassing raw data, and show a structure-dependent scale effect, revealed by n_filament>n_tow where n is the stress exponent. The relationship between SCG coefficient and chemical composition of the substrate is discussed and highlights the major effect of doping elements (Ti or Zr), oxygen or hydrogen content.     

Harvesting Air and Light Energy via “All-in-One” Polymer Cathodes for High-Capacity,Self-Chargeable,and Multimode-Switching Zinc Batteries

Aqueous rechargeable Zinc (Zn)–polymer batteries are promising alternatives to prevalent Li-ion cells in terms of cost, safety, and rate capability but they suffer from limited specific capacity in addition to poor environmental adaptability. Herein, air and light are successfully utilized from external environments in single near-neutral two-electrode Zn batteries to enable remarkably improved electrochemical performance, fast self-charging, and switchable multimode-operation from Zn–polymer to Zn–air cells. This system is enabled by a well-designed polyaniline-nanorod-array based “all-in-one” cathode combining reversible redox capability, oxygen reduction activity, and photothermal-responsiveness. The initiative design allows perfect integration of multiple energy harvesting from ambient “air” and light, energy conversion, and storage in one single cathode. Thus, it can act as an efficient light-assisted electrically-rechargeable Zn–polymer cell featuring the highest specific capacity of 430.0 mAh g⁻¹ among all existing polymer cathodes. Without external power sources, it can be self-charged to deliver a high discharging capacity of 363.1 mAh g⁻¹ by concurrently harvesting chemical energy from air and light energy for only 20 min. It can also switch to a light-responsive Zn–air battery mode to surmount the output capacity limit of Zn–polymer battery mode for continued electricity supply.     

A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D,Suspended Sensor Array Patterning

Terahertz (THz) imaging is expected to become powerful tools for non-destructive inspections. To ensure the practical use of THz non-destructive monitoring, versatile THz imagers with adjustable designs that can eliminate the complexities and the bulkiness of the device are urgently required. Herein, a self-aligned filtration process for a 2D, free-standing carbon nanotube film array and its application to a THz video camera patch are reported. The presented techniques enable a) to freely design the camera size, sensor array pattern, and suspended shape according to its applications, b) to cut the camera patch into desired shapes, and c) to attach them to the objects that are intended to be measured. Real-time, non-destructive monitoring of various infrastructures is demonstrated. These results indicate that it can function regardless of restrictions, such as the shapes and locations of the measurement samples, thus providing a strong possibility for use in future non-destructive sensor networks.     

Ferroelectric and electromechanical performance of diverse engineered states of Mn-doped 0.75Pb(Mg1/3Nb2/3)O3-0.25PbTiO3 ceramics

The materials processing history has a great influence on their properties and finally determines their application effect. In this paper, the ferroelectric, polarization-switching current, and strain properties of Mn-doped 0.75Pb(Mg_1/3Nb_2/3)O₃-0.25PbTiO₃ ceramics were studied in fresh state, aged state, and poled state, respectively. Compared with the symmetric polarization-electric-field (P-E) hysteresis loops, current-density-electric-field (J-E) curves, and bipolar electric-field-induced strain (S-E) curves in fresh state samples, asymmetric P-E loops, J-E curves, and bipolar S-E curves were obtained in poled state samples. Well-aged-state samples exhibit double hysteresis P-E loop, four peaks J-E curves, and symmetric S-E curves without negative strain. The symmetry-conforming short-range order (SC-SRO) principle of point defects and internal electric field E_i is employed to clarify the different phenomenon of three states. Results indicated that randomly oriented defect polarization P_D in aged samples can reverse the spontaneous polarization P_S back and result in the double hysteresis P-E loop and four peaks J-E curves. The oriented P_D and resulting E_i in poled-state samples will lead to the asymmetric loops and strain memory effect.